Basic Boat Info
Dimensions
Engines / Speed
- Make: Caterpillar
- Model: C-12
- Drive Type: Direct
- Fuel: Diesel
- Engine Power: 720hp
- Type: Inboard
- Propeller Type: 5 Blade, Bronze
- Year: 2006
- Engine Hours: 1570
- Engine Location: Port
- Make: Caterpillar
- Model: C-12
- Drive Type: Direct
- Fuel: Diesel
- Engine Power: 720hp
- Type: Inboard
- Propeller Type: 5 Blade, Bronze
- Year: 2006
- Engine Hours: 1570
- Engine Location: Starboard
Tanks
Other
- Ceran glass topped cooktop
- Sharp microwave convection oven – R930
- Extra circuit breaker – 20AMP- for DC electronics breakers
- Icemaker U-Line 110V installed under port helm deck bench seat
- Oil change kit 12V – oil exchanger supplied by GB – model 9506
- Window screens on all opening hardtop windows
- Install lift mechanism for end of master queen berth
- Provide cabinet w/door to install a flush mount 20” flat screen TV inboard of galley/companionway
- Install on/off fuel transfer switch at helm and additional solenoid
- Helm deck starboard side to install owner supplied Bostrom shock absorbing base and chairs onto starboard side helm cabinet with drawer underneath
- Install OceanAir screens to hardtop (2) overhead vents/hatches
- Install Teak only in helm deck
- Helm deck overhead lighting to install standard Cantaluppi David overhead lights – (4) white and (2) red
- Additional outlets
- (2) 110V outlets for electrical – (1) installed under cabinet in galley next to existing receptacle – (1) installed 110V outlet forward of angled air conditioning vent against wall
- 110V outlet (1) in center of aft salon U-settee bulkhead
- 110V outlet – waterproof- (1) install in helm deck starboard aft bulkhead, forward of angled air conditioning vent against wall
- Install owner supplied safe under companion way steps
- Port cabin modification
- Asko washer and dryer – stack-up with teak louvered doors
- Washer – Asko W6021
- Dryer – Asko T711
- Upper and lower berths – the fore and aft berth to the bottom and the athwartship berth to the top
- The lower berth to be as wide as possible and drawer center and hatches (easy access to the for and aft berth areas)
- Will also include a hinge to the lower mattress so that mattress can fold up when accessing hatches
- Hanging locker
- Asko washer and dryer – stack-up with teak louvered doors
- Fit owner supplied sinks on Maona Savannah Corian
- Install air conditioning vents in each head
- Install owner supplied both salt and fresh water-faucet in forward anchor locker
- Change shower tile grout to match standard marble tile
- Install overhead light dimmers in master stateroom, salon, companionway, galley, and helm deck
- Install courtesy lights in master stateroom, guest stateroom, and galley
- Install folding bench seat in master stateroom head shower
- Inboard galley bar storage – add storage to hang 12 wine glasses and 10 cocktail glasses – to adjust galley to suit glass storage
- Galley – countertop to be Magna Savannah
- Install teak panels on forward and aft salon bulkheads
- Prep for water maker
- Galley Modification
- Replace oven space under cooktop with pullout drawer for pots and pans storage
- Install pegs to hold plates, etc. in dish cabinets
- Cable Master, Glendinning 50amp 75’ cable
- Provide and install Glendinning cable master remote control
- Provide and install Glendinning cable master remote control filter
- Light, fluorescent w/Aqua signal (engine room) 2 x 20
- Install (2) group 31 AGM batteries in lieu of (2) 8-Ds for bow thruster – custom battery boxes to be laminated
- Varnish teak engine room slats with satin varnish
- Delete dorade vents and teak box – Install owner supplied (2) nicro solar dorade vents
- Install (2) lift-up cushions helm deck port settee
- Trim tabs, indicator
- Air-conditioning, reverse cycle, Marine Air 110V (2) 16,000BTU units installed on helm deck. Aft helm deck air conditioning to be ducted into engine room. Separate 16,000BTU air compressor with on/off toggle switch for use of same air handler
- Helm deck to install owner supplied 12V telescopic table pedestal
- Supply and install Ultraleather at helm deck L-settee, helm deck straight settee, and fixed port helm seat – silk
- Install backrest brackets on forward side of port bench seat, install footrest on aft side of bench seat
- Delete cockpit standard courtesy lights
- Helm Deck Bar Modification:
- Add shelf 6” from top to helm bar
- Helm deck bar – cutouts for 10 shorter tumblers and 4 taller tumblers
- Master stateroom
- Install (2) reading lights at either side of forward berth
- Install (5) overhead lights
- Master Head
- Install Borma basin mixer
- Install stainless steel mirror finished sink
- Install flush mount sink drain
- Install thermostatic shower mixer
- Install shower handle with water conservation valve
- Install chrome flex 6’ shower hose
- Install light rail with lens above mirror
- Install light under cabinet above sink
- Install lights in roof
- Install light in shower
- Guest Stateroom
- (2) Mini interior folding arm reading lights
- (2) overhead lights
- Guest Head
- Borma A1 lux basin mixer
- Oval mirror finished washbasin sink
- Flush mount basin drain
- Shower mixer
- Shower handle with water conversation valve
- Chrome flex 6’ shower hose
- (1) light rail with lens over mirror
- (2) roof overhead lights
- Salon
- Install (2) supplied reading lights
- Install (4) overhead lights total – (2) in salon and (2) in companionway
- Radio equipped for XM Satellite hookup – owner supply
- Install the XM radio remote at the inboard side of the helm station
- Galley
- Install (1) light under forward overhead cabinets, and (1) light under aft overhead cabinets
- Install (1) courtesy light recessed above reach-in freezer, (1) courtesy light above reach-in storage and (2) above cooktop
- Install (3) overhead lights
- Install stainless steel mirrored finish double sink
- Install double drain kit (1) with basket strainers
- Install galley faucet with pullout sprayer
- Engine Room
- Install (5 total) moisture proof 40W-12V engine room lights; (2) installed to port, (2) installed to starboard and (1) installed forward center
- Install (2 total) 11W-12V engine room lights; (1) installed over port engine; (1) installed over starboard
- Install Dolphin 12V 60AMP battery charger
- Bow Thruster
- Install Max-Power model #125
- Install 10” tunnel – must be 1.5M long. Voltage 12V and one station control
- Install joystick
- Install (1) 45’ long control wiring
- Install (1) 500AMP fuse
- Install (1) fuse holder
- Install 24V 30AMP battery charger for max power bow thruster
- Cockpit
- Install port and starboard bulkhead light
- Install hot and cold transom shower with 10’ hose
- Install both salt and fresh water faucet in aft cockpit
- Exterior
- Install (2) diesel 2” deck fill
- Install (2) water 1-1/2” deck fill
- Install (2) waste deck fill
- Salon settee – pneumatic gas lifts – 2 openings
- Fabric:
- Provide (2) navy Ultraleather pillows without piping and (2) Assissi Navy pillows
- Galley, salon, and guest stateroom curtains – Assissi Navy
- Guest Stateroom bedspreads and pillow shams – Monaco
- Guest throw pillows – Assissi Navy
- Master Stateroom bedspread and pillow shams – Monaco
- Master Stateroom throw pillows – ships 4 yard loose Dorcy 50
- Master Stateroom rectangular throw pillow – Avelli navy with navy cord piping
- All curtain tiebacks in guest and master stateroom – navy
- Salon Settee Fabric – silk Ultraleather
- Master cabin curtains and master head curtain – Dorcy
- Break away rail and removeable lifeline for side boarding
- Burgee holder with varnish teak flagpole
- Double-stanchioned, double-layered bow rails
- Double-wide sunbrella sun pad
- Engine room vents in superstructure, not hull to minimize water entrance
- Exhaust port for starboard and port side heads
- Forward facing speakers (2x) mounted under hardtop brow
- Freshwater and raw water washdown spigots in line storage locker
- Galvanized anchor
- High gloss varnished teak accent rails on side of superstructure
- High gloss varnished teak toe rail with stainless steel hawse holes for lines
- Line storage locker on port and starboard side of windlass
- Painted awlgrip, beige nonskid decks
- Opening Bomar hatches with various locking positions, screen, and blackout shade (3x)
- Opening superstructure portholes with removeable screens (8x)
- Solar powered dorade vents for guest stateroom and guest head
- Stainless steel Anchor chute
- Stainless steel deck fills:
- Main fuel tank
- Auxiliary fuel tank
- Portside water
- Starboard side water
- Master head waste tank
- Guest head waste tank
- Stainless steel grab handles, running full length of raised superstructure
- Windlass with foot pedals and safety lock
- Anchor light
- Anchor light
- Deck sprayed in beige non-skid
- Furuno GPS antenna
- Garmin GPS antenna
- Horn
- Mast light
- Mast with stainless steel supports, can easily hinge down
- Stainless steel supports
- Teak name plates with running lights
- Wind reader
- Aft facing mezzanine with sunbrella upholstered cushions
- Cable and phone hookup behind portside gunnel access steps
- Center deck hatch accesses lazarette bilge, fuel tank valves, and stowage for tender outboard (15HP 2-stroke Yamaha)
- Centerline stainless steel flagpole mount with teak flagpole and plug for riding with tender across transom
- Cit water inlet on transom
- Cockpit speakers (2x)
- Deck sprayed in beige non-skid
- Dive door with locking positions for keep door closed or open
- Fixed teak swim platform with folding teak and stainless-steel swim ladder
- Hawse holes (4x), 2x in each transom corner for different line angles to stern cleat and clean shore power cord positioning
- Hinged, centerline mezzanine entrance to engine room
- Hot and cold freshwater shower on transom
- Manual bilge pump at bottom of starboard side gunnel access steps, pump bar mounted underneath starboard side cockpit gunnel
- Molded fiberglass steps up the gunnels on either side
- Outboard deck hatches provide access to teak grated lazarette storage that go very far forward, perfect for fenders and lines
- Raw water hookup on transom with strap for coiled hose
- Rod holders (4x), 2x on either side of cockpit, all drain to cockpit
- Shore power cable master output and switch on portside behind gunnel access steps
- Storage underneath outboard side set in mezzanine, with teak grates to prevent water collection
- Teak accent flooring on step up to gunnels, both sides
Generator:
- Northern Lights 12KW M843NK3 w/sound shield
Engines:
- Caterpillar C12 inboards, 4-stroke, turbo charged (720HP each)
Transmissions:
- Twin Disc MGX511A, 1.92:1 reduction gear
- 110V outlets on forward bulkhead (2x)
- Algae-x Fuel polishing system
- Aluminum caped stringers
- Analog readout for generator temperature, voltage, oil pressure, and running hours
- Battery switches for:
- Generator
- Starboard engine
- Port engine
- Services
- Breakers For
- Oil change pump
- Cable master
- Underwater lights
- Stereo
- Dolphin 12V 60A battery charger
- Duplex Raycor primary fuel filters (selectable for port, starboard, off, or both)
- Engine and house batter parallel switch
- Freshwater spigot
- Generator primary fuel filter mounted accessibly, under generator
- Generator start/stop and preheat control
- Inverter battery switch
- Inverter system hardware (system bypassed currently)
- MarineAir air conditioning compressors for master, salon, forward helm deck, and aft helm deck air handlers
- Murphy engine room digital gauges for
- RPM
- Coolant temperature
- Fuel pressure
- Oil pressure
- Load
- Northern Lights 12KW Generator (120/240V)
- Sea Star power steering reservoir with pressure gauge
- Stainless steel grab handles
- Teak grated suspended floor above bilges
- Twin Caterpillar C12s with ZF direct-drive transmissions (720 HP each)
- X-Change oil change system for generator, engines, and transmissions
- Aft four-piece, removable EZ2CY enclosure for helm deck
- Bar in front of inboard side of companion seat, complete with:
- Felt lined top shelf with hinging top and fold out wall with Corian insert – designed to fit two different sizes of glassware (4x each)
- Felt lined sliding shelf for six low ball glasses
- Felt lined sliding shelf divided into storage for 6 bottles
- Bomar opening hatches (2x) with locking positions, screen, and blackout shade – hinged aft to maximize air flow underway when open
- Dimmable, overhead lights with gold trim and teak bezel
- Double armed windshield wiper for each windshield pane
- Double wide companion bench seat with reversible, teak ladderback backrests to sit facing aft
- Electric high-low varnished teak table with holly accent, switch within reach from sofa
- Electrically opening center windshield (hinges forward)
- Folding teak footrests sprayed in clear nonskid for forward facing and aft facing helm setup
- Folding, lockable door for entrance to salon with a stainless steel hook to hold open
- Forward helm deck air conditioning thermostat with dark bezel to match teak cabinetry
- Forward helm deck air handler with teak louvered intake and output grates
- Fusion stereo with dial zone controls (bow, forward helm deck, aft helm deck, cockpit)
- Helm deck speakers with teak bezel (4x)
- L shaped sofa on port side of helm deck, with storage underneath all seat bottoms
- Large helm deck, tinted side windows (2x per side, 1x sliding per side)
- Large port side sliding window for companion seat with sliding screen
- Lockable, in floor access to engine room for easier removal of large items
- Molded console for aft helm deck air handler with wired coax and 110V outlet in waterproof covers, ideal spot for future install of cockpit TV
- Natural teak flooring
- Overhead teak grab handles
- Port facing bench seat on starboard side with storage underneath and gas-assisted lifting seat bottom
- Sliding, lockable access to entrance to salon
- Table features a smaller folding leaf that hinges underneath, out of side when not in use
- Teak framed chart box with removeable overhead light in red and white
- Three-piece windshield
- Two levels of storage under companion bench seat – one accessed by removing the seat bottom, the other via access near the floor
- U-line icemaker located under inboard part of port side companion bench seat
- Vinyl headliner held in place with teak framework
- 110V outlets (2x) with dark bezel to match teak cabinetry
- AC and DC power distribution panel and source switching underneath inboard side of helm behind clear door
- AC systems monitor with voltage, amps, and current
- Analog gauges for
- Coolant temperature
- Oil pressure
- Rudder indicator
- Alternator output
- Transmission pressure
- Analog tachometers (2x) with digital readouts for:
- RPM
- Hours
- Engine location
- Oil pressure
- Coolant temperature
- Transmission pressure
- Load
- Bennett trim tab controls with indicator
- Bow thruster control
- Control switches for
- Horn
- Fuel transfer pump
- Opening center windshield
- Low speed mode
- KVH Satellite TV
- DC systems monitor with voltage, amps, current, and approximate battery life remaining
- Double wide bench seat with reversible, teak ladderback backrests to sit facing aft
- Drawers (3x) hidden behind opening door under helm seat, inboard facing
- Easy access to electronics breakers located above helm
- Folding teak footrests sprayed in clear nonskid for forward facing and aft facing helm setup
- Furuno 48” open array radar
- Furuno NavNet 10” color chartplotter with radar display and sonar (wireless remote)
- Garmin 4212 mounted above helm
- Generator start/stop and preheat
- Large starboard side sliding window with sliding screen
- Manual override for engine room fire suppression system with system status indicator
- Mechanical over electrical stainless steel engine binnacle
- Raymarine wind instrument
- Raymarine ST2 60 data displays (2x) with helm mounted remote
- Ritchie compass
- Simrad AP26 autopilot with wired remote
- Spotlight control
- Standard Horizon GX230S VHF with handset mounted on outboard side for cleaner lines
- Teak, oversized, six-spoke steering wheel
- Two levels of storage under helm bench seat – one accessed by removing the seat bottom, the other via access near the floor
- Windlass breaker
- Windshield wiper dial control (3x) with washer function
- Bookshelf and storage shelves above sofa
- C-shaped sofa to starboard
- End table for sofa with guard, two drawers, and open storage area beneath
- Floating carpet
- Folding, frosted reading lights on fore and aft bulkhead
- Hidden door in stairs for safe
- Large picture/art frames on forward and aft bulkhead (3x)
- Opening stainless steel portholes with removable screens (2x)
- Opening storage cabinets on starboard bulkhead of salon
- Overhead, frosted, dimmable lights with teak bezel and gold trim
- Pneumatic lifting center sections of sofa for bulk storage
- Rail mounted porthole shades with stays (2x)
- Removeable seat bottoms for area flanking sofa
- Satin finished teak steps to pilothouse, sprayed in clear nonskid
- Stacked, Asko washer and dryer hidden behind teak louvered doors
- Standing gran handle integrated into starboard side bulkhead of pilot house access steps
- Stereo for cabin and DVD player accessed in forward storage above sofa
- Storage and outlets underneath third step when hinged up
- Storage behind starboard bulkhead, behind seat backs
- Teak and Holly flooring
- Teak and Holly flooring
- Teak grab handle on starboard side of steps to pilot house
- Teak louvered air conditioning vent (2x)
- Teak louvered grates to conceal cabin speakers (2x)
- Teak louvered vents for bulk storage area
- Vinyl headliner held in place with teak accent framework
- Whicker ottomans with storage (2x), tops flip to become a flat, hard surface
- 110V outlets mounted on underside of overhead cabinetry for clean look
- Air conditioning thermostat with dark bezel to blend with teak cabinetry
- CO2 detector
- Cooktop with folding countertop lid to cover when cooktop is not in use
- Countertop storage for bulk items on outboard side of countertop, fore and aft with hooks to hold accesses open – second layer of storage revealed when removing false bottom
- Custom glassware storage on inboard side of galley
- Downward facing accent light bars on aft and forward bulkhead
- Faucet for purified water through secondary filter
- Floorboard access to storage for large pantry items
- Large item storage with pullout shelves under cooktop
- Lights switches with dark bezel to blend with teak cabinetry
- Opening stainless steel porthole with removeable screen
- Overhead storage cabinets above sink on forward bulkhead (3x)
- Overhead, frosted, dimmable lights with teak bezel and gold trim
- Pullout faucet with control for stream vs. shower water flow
- Rail mounted porthole shade with stay
- Sharp convection oven/microwave in aft bulkhead
- Spice racks and storage for smaller items built into port side bulkhead (3x)
- Stainless steel, mirror finished double sink
- Subzero under counter refrigerator and freezer (one refrigerator and on half refrigerator/half freezer unit)
- Teak and Holly flooring
- Teak louvered air conditioning vent
- Teak louvered extractor vent above cooktop
- U shaped countertop
- Under sink access with pullout garbage can
- Under sink storage drawers (2x)
- Utensil drawers (4x)
- Wooden art/picture frames on backsplash (4x)
- Air conditioning fan control (slaves off salon unit)
- CO2 detector
- Floating carpet
- Floor hatch with teak grates for storage, which remove to access vacuum pump for master head
- Fore and Aft bunk wider than traditional single bunks
- Four drawers under top bunk
- Half-height hanging locker under inboard side of top bunk with storage access panel underneath
- Lights switches with dark bezel to blend with teak cabinetry
- Mattress hinged for ease of access to underside hatches
- Mirror on aft bulkhead
- Nightstand for lower bunk with 110V outlet, dimming light switch, and storage beneath with access to water shut off for washer
- Opening stainless steel portholes with removable screens (2x)
- Over/Under bunks
- Overhead, frosted, dimmable lights with teak bezel and gold trim
- Rail mounted porthole shades with stays (2x)
- Reading lights wall mounted for top and bottom bunks
- Sliding access to storage shelves underneath sink
- Storage access forward of sink in backsplash
- Storage access hatches under bottom bunk
- Teak and Holly flooring
- Teak with satin finish throughout
- Vinyl headliner held in place with teak accent framework
- Wall mounted hardware to hold stateroom door open
- Ceiling-mounted, stainless steel rails for wrap around shower curtain
- Corian countertop
- Opening stainless steel porthole with removable screen
- Overhead, frosted, dimmable lights with teak bezel and gold trim
- Overhead, frosted, dimmable lights with teak bezel and gold trim
- Rail mounted porthole waterproof shade with stay
- Removable faucet with wall mount for shower
- Shower curtain with stays to keep folded behind door
- Sliding access to under-sink storage and shelving
- Sliding storage cabinet in back splash with access to:
- Control for vacuum pump
- 110V outlets (2x)
- Control for head extractor fan
- Control for macerator pump
- Stainless steel, mirrored-finish sink
- Teak floor grate
- Teak towel rack
- Vaccuflush head with foot pedals
- Wall hardware to hold head door open
- Air conditioning thermostat with dark bezel to blend with teak cabinetry
- Bed lifts on gas struts for access below
- Center queen, innerspring mattress
- CO2 detector
- Custom enlarged layout by having guest stateroom be top and bottom, rather than side by side, bunks
- Floating carpet
- Folding reading lights with local switch
- Hanging closet with teak louvered door
- Lights switches with dark bezel to blend with teak cabinetry
- Lockable door with wall mounted lock to keep open
- Opening stainless steel portholes with removeable screens (2x)
- Overhead Bomar, opening hatch with lockable positions, screen, and shade
- Overhead, frosted, dimmable lights with teak bezel and gold trim
- Port and starboard shelves beside bed with sliding storage access
- Samsung Television mounted atop hanging closet
- Sliding drawers, starboard side (3x)
- Sliding, rail-mounted porthole shades with wrap stays
- Stainless steel escape ladder hidden behind stateroom door with corresponding clips in opening hatch for emergency escape
- Stainless steel grab hand inside of door, inboard side
- Starboard side storage cabinet
- Teak and holly flooring
- Teak louvered air conditioning vents on headboard
- Teak planked port and starboard walls
- Teak satin finished woody throughout
- Vinyl headliner held in place with teak accent framework
- Accordion style, folding shower doors with lock
- Corian countertop
- Holding tank level indicator
- Locking door with catch to keep open
- Satin-finished teak throughout
- Shower with bench seat
- Sliding access to under-sink storage and shelving
- Sliding storage cabinet in back splash with access to:
- Control for vacuum pump
- 110V outlets (2x)
- Control for head extractor fan
- Control for macerator pump
- Stainless steel finished sink
- Teak and holly flooring
- Teak louvered air conditioning vent
- VaccuFlush toilet with foot pedal
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.